To connect your AlphaShieldŽ Home Edition to your Internet Connection and get 100% guaranteed security.
- Connect power to the AlphaShieldŽ Home Edition.
Middle LED will turn RED.
- Connect "PC" port of the AlphaShieldŽ Home Edition to your computer using the cable provided in the box.
Left LED will turn RED/GREEN depending on the setting of the switch at the back of the AlphaShieldŽ Home Edition.
- Connect "Cable/DSL" port of the AlphaShieldŽ Home Edition to your modem using the cable provided with the MODEM.
Right LED will turn RED/GREEN depending on the setting of the switch at the back of the AlphaShieldŽ Home Edition.
- Press the Blue (Connect) Button on top of the AlphaShieldŽ Home Edition.
All LEDs will turn GREEN.
Modes of Operation:
Operation in Manual Mode:
When the Manual Mode is selected, a connection session must be manually initiated by
pressing the Connect button (Blue) on the AlphaShieldŽ Home Edition. Once the Connect
button (Blue) is pressed, the Connect (Center) LED will illuminate green to indicate
to the user that he or she is connected to the Internet or Network. After an inactivity
period of 15 minutes, the AlphaShieldŽ Home Edition will disconnect and enter into a
Logical Disconnect state. In order to reconnect, press the Connect button (Blue).
The Connect (Center) LED will always indicate the connection status of the AlphaShieldŽ Home
Edition device.
Operation in Auto Mode:
When the Auto Mode is selected, a connection session must be initiated by pressing the
Connect button (Blue). The Connect (Center) LED will illuminate a solid green to indicate
that the AlphaShieldŽ Home Edition is in a connected state.
The duration of the connection is infinite, regardless of user activity. It is highly
recommended that once the user has completed his or her Internet session, the Disconnect
button (Grey) is manually pressed to cause a Logical Disconnect.
Operation in Lock Mode:
When the Lock Mode is selected, a connection session must be manually initiated by pressing
the Connect button (Blue) on the AlphaShieldŽ Home Edition. Once the Connect button (Blue)
is pressed, the Connect (Center) LED will illuminate green to indicate to the user that he or
she is connected to the Internet or Network. After an inactivity period of 15 minutes, the
AlphaShieldŽ Home Edition will disconnect and enter into a Physical Disconnect state. In
order to reconnect, press the Connect button (Blue).
NOTE: Physical disconnection may result in your computer releasing the IP Address
assignment.
The Connect (Center) LED will always indicate the connection status of the the AlphaShieldŽ
Home Edition device.
If you are still experiencing problems with connecting to the Internet, If you are still
experiencing problems with connecting to the Internet, please contact us toll free at
1-866-722-3638
|
|
